Wever & Ducré Deep 1.0 PAR16 Recessed light Black Torsion springs

The beam angle determines how wide or narrow a lamp scatters light on a surface, and is expressed in degrees (°).

This indicates which type of light source in terms of shape and size is compatible with this fixture. For example, the A series indicates a classic light source shape, the T series indicates tubular lamps and the G series indicates spherical lamps. Read more...

CRI stands for Colour Rendering Index. It is a measure of how vividly colours are rendered in a room. A higher CRI value gives a more accurate rendering. Read more.

This is the highest possible amount of visible light the lamp produces (in non-dimmed mode). Using this value, you can determine the amount of light and the number of lamps in a project or installation.

This indicates whether the light source is included or not. If the lamp(s) are not included, you will find the matching lamp in accessories.

This is the electrical part of the lamp that makes contact with the light source. The type of fitting determines which type of light source you can use. Manufacturers always indicate the maximum power the fitting can handle. It is important that the total consumption of the light source does not exceed the maximum power of the fitting.

The appliance class indicates the extent to which the appliance protects against electric shock. The degree of insulation is shown according to ascending protection values "I", "II" and "III". The higher the device class, the higher the degree of protection.

The IP rating is a standardised rating system that indicates the degree of protection the device provides against the ingress of solid objects (such as dust) and liquids (such as water). For example, an IP65-rated device has good protection against solids (IP6X) and is resistant to spray water (IPX5). The higher the IP rating, the better protected the device is. "Read more.

This indicates whether the brightness of this product can be adjusted using a dimmer. This does not mean that a dimmer is included.

This refers to the specific type of dimming technology used in the product. Common types include PWM (Pulse Width Modulation), TRIAC (Triode for Alternating Current), and DALI (Digital Addressable Lighting Interface). Each type of dimming technology has its unique features and benefits, and it's essential to choose the right type for your lighting system to ensure optimal performance.

Indicates the type of energy source used to operate the lighting, e.g. mains power, battery or solar.

This indicates the type of springs of the lamp. The spring type is determined according to the surface in which recessed lights are installed. Wire springs are used for hollow walls such as suspended plaster ceilings. Blade springs are used for solid walls such as vaulted ceilings. In many cases, blade springs can be used for both solid and hollow walls. Manufacturers often designate wire springs as S1 and use the designation S2 for blade springs.

This tells you whether the manufacturer allows the product to be installed outdoors. Lighting for outdoor use has better resistance to elements such as rain, heat, UV or even corrosion. These fixtures always have a higher IP rating to prevent water damage.